High Performance Architectural Profile


A natural grain appearance provides soft to medium profiles, enhancing building design
characteristics to suit the most fastidious of owners.


For weatherproofing, decorating, restoring and protecting exterior walls and to enhance
existing building environments.


✓ Easily applied
✓ Wide colour range.
✓ Can be overcoated to provide satin or gloss finish.
✓ Weather and UV resistant.
✓ Water based, premixed.


Volume Solids 68% + 1%
Specific Gravity 1.4
Flexibility 60% @ 20°c
Finish Satin or Gloss


The surface to be treated should be clean and sound, free of oil, grease, flaking paint,
laitance and material deleterious to the adhesion of the coating system.
New concrete should be a minimum of 28 days old before application commences.
All holes and cracks can be repaired prior to coating.
Do not apply coating if temperature is below 10°c or above 35°c.
Do not apply coating if rain is imminent. Sound coatings may be overcoated.


Application by brush, texture roller or spray to the prepared pre-primed surface.
Apply at the rate of 1.5m2 per Litre and finish to the required texture.
Do not thin material.


Wash all equipment with fresh water immediately after use.


15 Litre.


12 months.


Refer to Westlegate Pty Ltd Material Safety Data Sheet (MSDS) for instructions.

The information contained on this site is intended to give a fair description of the products and their capabilities under specific test
conditions.It does not constitute an offer by the manufacturer, nor does the manufacturer warrant or guarantee its accuracy or
completeness in describing the performance or suitability of the various products !