Premier Paver Cleaner is a quaternary compound that provides a protective layer on masonry
surfaces to prevent moss or mould growth.


Premier Paver Cleaner is used to prevent or eliminate moss and mould growth on masonry
surfaces such as paths and walls. It can also be used to kill lichen on roof tiles.


 Ease of use.
 Economical treatment.
 No need for high pressure water.
 Wet the surface and leave.
 No colour change to original surface colour.


Use at the ratio of 5 parts water to 1 part Premier Paver Cleaner. Apply by spray thoroughly
wetting the surface and leave. The moss and mould contamination will reduce following each
period of rain until the surface is clean. In some instances this could take several months.
Re application might be necessary on highly contaminated areas or after several periods of
heavy rain when the residual surface material has been diluted sufficiently to reduce efficacy.


Wash all equipment in fresh water immediately after use.


5 Litre.
20 Litre.


6 months.


Refer to Westlegate Pty Ltd Material Safety Data Sheet (MSDS) for Instructions.
Premier Paver Cleaner is considered Non Toxic according to Worksafe Australia Criteria when
used in accordance with the correct recommended application procedures.
Normal protection measures of vapour mask and protective gloves used when spraying any
chemicals is recommended.