DESCRIPTION

A resin rich, low viscosity, high solids co-polymer colour coating for a variety of surfaces.

USES

Used as a coating for the refurbishment of concrete roof tiles, wood and various concrete surfaces where
a gloss coating is required.

FEATURES

 Extremely durable, water based.
 Easily applied & easily over coated.
 UV resistant protective coating.
 Wide colour range.
 Excellent gloss retention.
 Aesthetically pleasing finish.

TECHNICAL DATA

Volume Solids 50% +/- 1
Specific Gravity 1.13 +/- 0.05
Elongation to break 100%
Finish Gloss
Chemical resistance Resists mild chemical environment.

PREPARATION

The surface to be treated should be clean and sound, free of oil, grease, flaking paint, laitance and
material deleterious to the adhesion of the coating system.
Not recommended for below grade waterproofing.
New concrete should be a minimum of 28 days old before application commences.
All holes and cracks are to be repaired prior to coating.
Do not apply coating if temperature is below 10°c or above 35°c.
Do not apply coating if rain is imminent. Sound paint may be over coated.

APPLICATION

Application by brush, roller or spray to prepared, preprimed surfaces at the rate of 5m2 per Litre.
If appropriate apply second coat at 5m2 per Litre allowing a minimum four (4) hour drying period
between coats. Coating will be touch dry in approximately 15 minutes.

CLEAN UP

Wash all equipment in fresh water immediately after use.

PACKAGING

15 Litre.

SHELF LIFE

12 months.

SAFETY

Refer to Westlegate Pty Ltd Material Safety Data Sheet (MSDS) for instructions.