Limewash

DESCRIPTION

Westox Lime Wash is based on slaked rock lime using a number of traditional formulations. Various modern additives may also be deployed to obtain the performance characteristics required on any particular project. The selection of particular blend depends on the substrate to be coated after discussion with the client.

COLOUR

Mainly pastel shades to customers requirements or tinting on site.

PREPARATION

Ensure that surfaces are free of loose and flaking paint, grease or other contaminants.

APPLICATION

Dampen porous surfaces immediately before applying Westox Lime Wash.

For previously painted surfaces it is recommended that light sanding is undertaken. For additional adhesion the surface may be primed using Westox RAP Primer (8m2 per litre) immediately before applying the Westox Lime Wash.

The Westox Lime Wash is applied at the rate of 5m2 per litre coat with three (3) coats normally required. Allow each coat to dry before applying subsequent coats.

CLEAN UP

Wash out in the water after use.

PACKAGING

Container Size: 20 Litre and 200 Litre container.


The information contained on this site is intended to give a fair description of the products and their capabilities under specific test
conditions.It does not constitute an offer by the manufacturer, nor does the manufacturer warrant or guarantee its accuracy or
completeness in describing the performance or suitability of the various products !