A cost effective resin rich primer based on a pure acrylic resin.
Wesprime is a premixed primer. It is an excellent primer for wood, cement roof tiles, cement
render, concrete or previously coated substrates that are to be coated with Westox
Colourcote, Satintex, Glosstex or Wesdex. Wesprime can also be used as a clear glazecoat
over WX Colourcote.
All surfaces to be coated must be clean, dry and free of any material that may affect the
adhesion of the primer. Repair any unsound substrate prior to coating.
No mixing required. Apply by brush, roller or spray. If unsure of adhesion, carryout a small
test section prior to full application. Allow primer to dry for a minimum 1 hour @ 25oc before
applying top coats. A longer cure time will be required in lower temperatures.
Drying Time Approximately 20 mins @ 25oc
Recoat Time Approximately 1 hour @ 25oc
Solids as supplied 25% + – 3%
Coverage 6 – 8m2 per Litre, one coat.
Clean all equipment in water immediately after use.
Refer to Westlegate Pty Ltd Material Safety Data Sheet (MSDS) for instructions.